Biohort SmartBase PLUS for Neo Garden Shed

The SmartBase^PLUS foundation is an ideal solution for installing your Neo garden shed on a lawn or sloping ground. Unlike the standard SmartBase foundation, it uses ground screws instead of adjustable feet, allowing it to compensate for slopes of up to 15 cm. This provides a secure and stable base for your shed. The ground must, however, be compact and free from large stones.

• Ground screws instead of adjustable feet
• Compensates for slopes of up to 15 cm
• Minimal excavation required
• No frost-resistant gravel sub-base required
• Easy to remove if necessary
• Perfectly designed for the Neo garden shed
• Storm-resistant
• Load capacity: max. 200 kg/m2

Included components:

• Specially designed foundation frame
• Aluminium floor boards with a grooved surface
• Hot-dip galvanised ground screws
• Mounting plates with multiple adjustment options
• Integrated water barrier to protect against water ingress
• Manual ground screw installation tool

Additional aluminium floor panels and an aluminium floor frame are no longer required!

Installation:

• Assembly time: 2 to 4 hours (two people)
• Tools required (not included): Hammer drill, Ø 40 x 600 mm drill bit, spirit level, drill, 13 mm and 24 mm open-ended spanners, shovel

Assembly instructions:

1. Prepare the installation site
2. Pre-drill the holes using a hammer drill and screw in the supplied ground screws
3. Connect the mounting plates to the ground screws and level them using a spirit level
4. Position and secure the frame and connecting struts
5. Insert and secure the aluminium floor boards

Important: These foundation tips are provided as non-binding recommendations. Customers are responsible for ensuring that their foundations are appropriately designed and constructed. Biohort accepts no liability for damage caused by inadequately secured products.